Skip to main content

Where do we put a 3D printer in the library?

Where do you put a printer? The best answer is somewhere that is in view when printing. We have 2 Ultimaker 2 printers. One Ultimaker 2 is in the Digital Media Lab in the Reference Department.  Most people do not see the printer there because it is tucked away in a corner but at the same time we don't have to worry about kids sticking their fingers in it or it getting bumped or jostled in the daily hustle and bustle of after school.  Although not directly seen from the service desk, it is still possible to swing by and check on a print or if it's not too loud to hear if something stops.

Another printer that I use more often is the Ultimaker 2 extended in our staff Resource Room where we hold many Tinkering Tuesday and 3D printing specific classes.   This is on the bottom floor where the printer is hidden behind a room divider.  We are a 3 floor building with the children's room located on the 2nd floor and the Reference/YA department located on the 3rd.  Sometimes when I don't get a chance to check on a print this is what happens. It was suppose to be a bus. Did you guess right? 3 hours of printing down the drain. 

In addition to just general mishaps,  my filament spools have been getting tangled which is something that could happen during long prints if the filament becomes loose when changing between reels.  I might not see this issue in time, leaving the printer to continue with the print but not having access to any filament, so it just prints NOTHING.  I fixed this problem by leaving the reels on the floor hooked up to a wooden block so the reels can fix themselves (I hope). Think like a paper towel holder. People online have designed 3D printed ways to solve the problem or using old lazy susans.  I LOVE THE INTERNET!





I finally installed a free app called Presence which turns any old iPhone or iPad into a remote camera that can be accessed through their website on any other device or computer.  All that is required is a reliable wireless network and a free account. If you leave it open it is a bit glitchy but it can be fixed by just reloading the webpage rather than having to leave the desk to go downstairs. It does save time when one is tied to the desk. My Fitbit is going to be quite sad with this development.



Wherever you decide to put your printer make sure it is well ventilated. An office, which is where our first printers started, is not a good idea especially if you are printing in ABS.  Having it out in the open on the floor or setting it up in a room that can have a window open during long prints is ideal. Even printing in PLA, which is what we do, does produce an odor which may or may not at this point be bad for you. 

Comments

  1. I would be flattened if all websites gave articles like that. clubflyers printing

    ReplyDelete
  2. YoBit lets you to claim FREE COINS from over 100 different crypto-currencies, you complete a captcha one time and claim as many as coins you want from the available offers.

    After you make about 20-30 claims, you complete the captcha and continue claiming.

    You can press CLAIM as many times as 50 times per one captcha.

    The coins will safe in your account, and you can convert them to Bitcoins or any other currency you want.

    ReplyDelete
  3. I havent any word to appreciate this post.....Really i am impressed from this post....the person who create this post it was a great human..thanks for shared this with us.
    drukarka 3d

    ReplyDelete

Post a Comment

Thanks for commenting!

Popular posts from this blog

Our most popular makerspace/STEM/Library of Things

As of April 2018, we did a kit circulation report.  We had 106 kits which have circulated 1,047 times since it's inception in 2015.  Here is the top 10 list of most circulated. These include hobby kits, puzzles, cake pans, instruments, science robots/STEM, and American Girl dolls. The ukulele kits (we have one soprano and one concert kit) have been around the longest and have circulated 106 times total.  Just remember someone should change the strings yearly and definitely include a tuner (we like the snark) as new strings on a uke take a while to break in. Surprisingly our meditation toolbox comes in second with 51 checkouts.  It is just some CDs and a DVD.  This one has also been around since the inception of our kits. Next up is our virtual reality headset toolbox.  It is a Homido Virtual Reality headset. If that is too pricey, I recommend Google Cardboard.  Our sewing machine comes in 5th.  Knitting is a great idea for a toolbox and very popular but li

New ideas for Circulation-Library of Things/ Makerspace Kits

The DFL currently experiments with hobby, STEAM, and Technology kits that are housed both in the adult section and the kids room. These kits include musical instruments, video equipment, puzzles, cake plans, robots, looms, and more available for checkout.  The kits are bought using our Amazon prime account, under the supervision of the head of circulation using a special makerspace kit budget and backed up by a kit committee made up of various departments to streamline the process.  The kits with the most holds by far have been the Retro Nintendo  and Super Nintendo Classic which were small batch pre-Christmas releases for the last two years.  Rather than blowing the dirt out of your old cartridges, these consoles have games built in for your playing pleasure. According to Walmart, the Nintendo "classics" are on sale as of today.  Our kit contains a small palm sized console, 2 controllers (try to upgrade wireless ones if you can), an ac adapter, and, I recommend, a carr

3D Printing Signs for the Library Collection

Last weekend, I went to the annual Tee-Off mini golf event at the Brookline Public Library.  As a first time visitor, I was mini-golfing with my phone at the ready. Special thanks to the AMAZING librarian rockstar Robin Brenner for so many great ideas. It truly is worth a visit just to see her teen room. Here are a few 3D printing/marketing ideas to takeaway: Having a  3D printer filtration cart would be wonderful in our library.  Look at the price if you dare.  Right now I have to go downstairs to retrieve prints because we are concerned about the fumes and little hands touching anything while the printer is on.  I have a video camera set up downstairs using an iPad 2 and the free app called Presence  for monitoring but sometimes I do forget to keep checking the presence website while I'm on the desk especially since it makes this annoying beeping sound to say, "Are you still watching?!"..As the sign reveals on the cart, the propensity to want to lean or jostle the car