Skip to main content

My new favorite 3D Printing tool

I'm in love.....

Digital Caliper Tool

We tried to print an iPhone case twice and still did not get the exact measurements right because we were using a regular ruler. With the Digital Caliper, we can now get an exact reading which will help with persnickety items like a phone case. It's available through Amazon for only $30.  This is also a quick and easy way to show kids what the actual size of their object is before printing.



Comments

Post a Comment

Thanks for commenting!

Popular posts from this blog

3D Printing Tips

Here are some go to tools to have when 3D printing: box cutter, needle nose pliers, wire snips

The wire snips are handy when you build any kind of supports or rafts onto your project and you need to carefully cut them off. The needle nose pliers I usually use to remove gunk from the tip of the extruder and the boxcutter was for getting off those 3D printed jobs that have stuck themselves to the non heated plate.

My newest tool: painter's tape. Sometimes the simplest things can make life easier. As I was struggling with my box cutter to pry a 3D creation from our Cube 2 non heated plate, a man went by our table at the Cape Cod Mini Maker Faire and said, "Oh just cover the plate with painter's tape". EUREKA! I still have to cover the masking tape with our special glue before printing but now when I try to pull off the creation I just pull at a tape strip and it comes off easily. No more soaking the plate for 10 minutes in hot water or prying it off with a knife (or in th…

Makey Makey Floor Piano

If you are looking for a short, low cost project to do with your Makey Makeys, this one is sure to be a big hit. It's a great small group project as well as an eye catching interactive display in some noisy area of the library (as long as you can keep library staff sane). This was made as part of our Tinkering Tuesdays lab. We had low tech cardboard construction, 3D printing, and the Makey floor piano going on simultaneously. It took us about 1.5 hours with 3 teens helping.

Materials List:
Aluminum Tape $12
Duct Tape (any color) $2
Makey Makey $50
CAT cable (there's one lying around your library trust me) or just use regular wire
Wire strippers
12 x 12 x 1.5 in puzzle piece exercise mat $12
white 6 x 8 tarp (but could be smaller) $12
Computer with internet running Scratch

This video shows a demonstration with step by step picture instructions and a more detailed video explanation. I got the idea from two sites that I used for consult: Ed Tech Junkies & Make It At Your Li…

New ideas for Circulation-Library of Things/ Makerspace Kits

The DFL currently experiments with hobby, STEAM, and Technology kits that are housed both in the adult section and the kids room. These kits include musical instruments, video equipment, puzzles, cake plans, robots, looms, and more available for checkout.  The kits are bought using our Amazon prime account, under the supervision of the head of circulation using a special makerspace kit budget and backed up by a kit committee made up of various departments to streamline the process. 
The kits with the most holds by far have been the Retro Nintendo and Super Nintendo Classic which were small batch pre-Christmas releases for the last two years.  Rather than blowing the dirt out of your old cartridges, these consoles have games built in for your playing pleasure. According to Walmart, the Nintendo "classics" are on sale as of today.  Our kit contains a small palm sized console, 2 controllers (try to upgrade wireless ones if you can), an ac adapter, and, I recommend, a carrying …