Skip to main content

3D Printed Fidget Spinners Update

I have been avoiding doing fidget spinners since I figured they would be old hat by now but over the past month I have been doing Intro to Tinkercad classes and it is all the kids want to talk about and print. Of course since I don't have the ball bearings, I tried to explain it to them that it is better to have the bearing first then measure around it but they happily 3D printed ones that they could just spin using their fingers. They kinda reminded me of brass knuckles....

Coincidentally, I saw a post on Facbook highlighting how to build custom spinners. This blog has everything you will need and I am very appreciative. It took me a few tries to get the exact measurements so that the bearing would fit in snugly but not too loose as it would fall right out. My measurements for the 22mm bearing was using 2 cylinders in Tinkercad, one cylinder measures 27mm all around, 7mm high with an inner "hole" cylinder of 22.5mm all around, 7mm high. I highly recommend using Tinkercad BETA. It allows you to just type measurements in once you click on the white or black boxes.


My class structure will be as follows:
1.Search Tinkercad for something that they want to use as the design spinner....(In the above example Yoda). I'm assuming once they see mine they won't want to use any of the pre-made shapes on the right.  I will explain to them that whatever they chose has to be flat. Think cookie cutters.

2. Once we copy and tinker the specific object from another user, I am going to teach them how to duplicate CNTRL + D, as the keyboard shortcut. Then we are going to grab a pre-made cylinder and stretch it out for the outer circle 27mm all around, 7mm high then duplicate it and make it smaller for the inner circle 22.5mm all around, 7mm high, and make it a hole.

3. This is a great time to teach about the align tool as I want to make sure both cylinders are selected and they will be aligned in the center using the middle black buttons (one is showing red in the picture below). If they are already aligned, the button will fade out. I can't believe I haven't used this tool more often. It is a huge time saver.

4. Once the 2 cylinders are aligned, I will show them the group tool and then how to move it into the center and then use the duplicate tool to make 3 more Yodas and the align tool once again to put all the Yoda's at an equal distant apart.  Then group them all together and measure the final size.



Depending on the level of proficiency in the class since we only have an hour, I might print a bunch of the locking buttons for the spinners myself to save time or I might just skip it entirely!

I am also going to show them how many tries I actually did to get the ring correct. If you are having trouble getting the ball bearing in, my suggestion was to freeze the bearing so that the metal would contract enough to squeeze it in and it will probably never ever come out again. AH SCIENCE!



Other posts on this subject:

Newton Free Library is doing them!

Athens Library has a tutorial and sample STL files.

School Library Journal presents a few creative ways to make spinners besides 3D printing.

Adafruit, one of my favorite website for tutorials and science kit purchases, has a great video of assembling the middle bearing. You need to take out the rubber in the middle and possible using rubbing alcohol to make it spin faster.

 

UPDATE: Make sure the silhouettes (if you do the google image silhouette search and convert into svg version) actually has some sort of bottom base that connects all the parts...as we learned the hard way with Darth Vader....If you have no idea about converting to svg, see this tutorial about hand drawing prints (just skip the drawing part and google image search a .jpg to use)






Comments

  1. Goodnow Library made them as well!
    https://twitter.com/GoodnowTeenLib/status/886774305148850176

    ReplyDelete
  2. A fidget spinner is a toy that consists of a bearing in the centre of a multi-lobed flat structure made from metal or plastic designed to spin along its axis with little effort.

    Fidget spinners became popular toys in 2017, although similar devices had already been invented as early as 1993. The toy became popular among schoolchildren and consequently some schools banned the spinners for being a distraction, while other schools allowed the toy to be used discreetly.

    Basically it is a toy just used to pass your time with. Well if you want to get a really cool fidget spinner you can do one by your own hands watching some videos on youtube channel: https://www.youtube.com/channel/UC_q7LIkA94wFVwB0C_gjkkw

    ReplyDelete
  3. ZOINKS! Thank you so much for sharing our fidget spinner. When we ran the class the tweens went crazy making wild spinners. It was a great intro to CAD and the lulzbot.

    ReplyDelete
  4. Using EasyHits4U you can earn free advertising credits by viewing other website-ads from a account base of over 1.2 million accounts. Earn advertising credits faster with a 1:1 exchange ratio.

    ReplyDelete

Post a Comment

Thanks for commenting!

Popular posts from this blog

Our most popular makerspace/STEM/Library of Things

As of April 2018, we did a kit circulation report.  We had 106 kits which have circulated 1,047 times since it's inception in 2015.  Here is the top 10 list of most circulated. These include hobby kits, puzzles, cake pans, instruments, science robots/STEM, and American Girl dolls. The ukulele kits (we have one soprano and one concert kit) have been around the longest and have circulated 106 times total.  Just remember someone should change the strings yearly and definitely include a tuner (we like the snark) as new strings on a uke take a while to break in. Surprisingly our meditation toolbox comes in second with 51 checkouts.  It is just some CDs and a DVD.  This one has also been around since the inception of our kits. Next up is our virtual reality headset toolbox.  It is a Homido Virtual Reality headset. If that is too pricey, I recommend Google Cardboard.  Our sewing machine comes in 5th.  Knitting is a great idea for a toolbox and very popular but li

New ideas for Circulation-Library of Things/ Makerspace Kits

The DFL currently experiments with hobby, STEAM, and Technology kits that are housed both in the adult section and the kids room. These kits include musical instruments, video equipment, puzzles, cake plans, robots, looms, and more available for checkout.  The kits are bought using our Amazon prime account, under the supervision of the head of circulation using a special makerspace kit budget and backed up by a kit committee made up of various departments to streamline the process.  The kits with the most holds by far have been the Retro Nintendo  and Super Nintendo Classic which were small batch pre-Christmas releases for the last two years.  Rather than blowing the dirt out of your old cartridges, these consoles have games built in for your playing pleasure. According to Walmart, the Nintendo "classics" are on sale as of today.  Our kit contains a small palm sized console, 2 controllers (try to upgrade wireless ones if you can), an ac adapter, and, I recommend, a carr

3D Printing Signs for the Library Collection

Last weekend, I went to the annual Tee-Off mini golf event at the Brookline Public Library.  As a first time visitor, I was mini-golfing with my phone at the ready. Special thanks to the AMAZING librarian rockstar Robin Brenner for so many great ideas. It truly is worth a visit just to see her teen room. Here are a few 3D printing/marketing ideas to takeaway: Having a  3D printer filtration cart would be wonderful in our library.  Look at the price if you dare.  Right now I have to go downstairs to retrieve prints because we are concerned about the fumes and little hands touching anything while the printer is on.  I have a video camera set up downstairs using an iPad 2 and the free app called Presence  for monitoring but sometimes I do forget to keep checking the presence website while I'm on the desk especially since it makes this annoying beeping sound to say, "Are you still watching?!"..As the sign reveals on the cart, the propensity to want to lean or jostle the car