Skip to main content

Cube 2 3D Printer Review

We have had the Cube 2 3D printers for over a year now and I think it's time to weigh in the pros and cons. For the record, we also have an Ultimaker 2 as my comparison for features. It does come with an extra price tag $ for those features but well worth the staff time I've saved. Most of our 3D printing programs with these Cube machines occur with first time users usually ages 10 and up.  Even if you don't have a Cube it is good to know the limits of any 3D printing machine before purchasing.



Cube Software....
Pros:
is pretty easy to use. Unlike other printing software (Cura for Ultimaker*) I've used, there are limited options so it doesn't feel daunting to work with.  Is it solid or hollow? Supports yes or no? How large?  Cubify is an easy download off the website and you can download it to as many computers as you want.
Our workflow is we create an object in Tinkercad, save as an .STL file then convert into Cubify. Cubify saves the options from the previous time so be careful. I recommend always putting supports on work especially if it is a patron's first time printing.  Supports also add to the time it takes to print so bear in mind with Cubes the time it says it will finish is not always the case.

*Later editions of Cura, come with a simpler format by switching between expert and quickprint settings.

Cons:
Due to the lack of advanced features, if a mistake is made in the .STL file there isn't much you can do to fix it within the Cube software. Make sure to save the original .STL to manipulate. Most kids don't have the file level with the work plate which may or may not be resolved with supports added. Cura allows you to separate parts of a print to save time.

Cube Itself...
Pros:
is plug and play... when it works. We had a print started within 20 minutes of box unveiling. It has a low intimidation factor.  Cube comes with ready to print files on a flash drive. Plug it into the Cube and it will be good to go..mostly.
It's easy to travel with*  so bringing it to community events is nice as long as you have an electrical outlet.  Other printers don't recommend a lot of movement or jarring (plus they can be heavy).

You can get supplies from Staples. Glue is proprietary to prime the work plate and costs $8 each.


Cons: 
*During travel, the filament is going to break between the flimsy connection between the nozzle and the reel during movement.  It's not too bad to clear usually but something you have to check before starting a print.


When the printers started filament jamming, it's not an easy task to get it out.  When I talked to the company they gave us a long Powerpoint presentation (with good pictures) on how to clear a filament jam. It's a learning curve for a librarian without experience taking things apart. You need to get all the screws out, remembering where washers and spacers go, and remove important parts like the fan just to get to the jam. All 3D printers jam at some point, but this one is hard to get unjammed. It took us 1/2 hr every time to clear the jam and sometimes you can't even get to where the filament is jamming due to the way the nozzle is made. This is not ideal to do during a class so usually I'll just promise kids a week to pick up their projects. Videos (not from the company) online recommend unclogging with piano wire while the printer is on so at least it is heated up but the instructions don't mention that.

In direct comparison, the Ultimaker 2 has an easy system that clears clogs. This requires heating and cooling the nozzle using buttons on the Ultimaker. No take apart necessary! This has saves us hours of time devoted to taking apart the Cubes. 

If a print is starting to mess up due to not enough glue on the work plate or you forgot to check if the filament broke in the visible tube between the reel and the nozzle, you can't pause the print, you have to start completely over. This is another example where having a heated plate like in the Ultimaker works to your benefit.

This printer is not a workhorse meant for 10 hrs of printing daily nor does it accomplish fine details especially for very small items. This is what one YouTube reviewer called a "Soccer Mom's 3D Printer" so if people are trying to make prototypes for an invention or a 1 inch T-Rex earring this isn't the printer for them. It was happy to print flat items like key chains, flat earrings, or luggage tags for beginners to get build excitement and confidence with 3D printing.

Don't buy too much filament up front because it does get brittle over time and sometimes the filament breaks inside the reel and you have to take the reel apart to get to it...It's INFURIATING to get the clips off.....

When things did go wrong, I looked to the internet for help but not much luck. It was mostly people complaining about the printer!



Here are some of the variety of things we have printed with both the Cube and Ultimaker 2. I bet you can guess which ones are printed with each machine.  The Cube 2 won't print the new sized iPhone cases which I have heard is a big draw for those with 3D printers.

My advice if you are going with the Cube (especially if you get them for free) is to use it to get people interested and once they wear out, you can push for a better printer.  Keep in mind that they are closing their consumer division. There have been many times that I'm glad we had the Ultimaker as a backup so I could keep printing class items when the Cubes jam and I don't have time to fix them.

Although it may seem daunting at first, I'm really glad that we have 3D printers at our library.  It is an important piece to establishing us as a creative center for the community. 

Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete
  4. This is a great 3D printer for home use. It’s small, fast, accurate and extremely easy to set up and operate.

    ReplyDelete
  5. Nice review on Cube 2 3D Printer. Most of your 3D printing programs with these Cube machines occur with first time users usually ages 10 and up. Even if you don't have a Cube it is good to know the limits of any 3D printing machine before purchasing. So we have to follow these steps before going to purchase. Recently I got a blog named 5 Easy Ways to Use Online 3D Printing,which I read and got to know that all of these unique ideas can be extremely useful. Yet, unless you’re starting a business to sell 3D printed products, the cost to own a 3D printer might not be worth the investment. Thanks a lot for sharing.

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. 3D Printer is very great.
    Thank you for letting me know about this product.
    see it here

    ReplyDelete
  9. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  10. This comment has been removed by the author.

    ReplyDelete
  11. Thanks for the blog loaded with so many information. Stopping by your blog helped me to get what I was looking for. 3d printing machine for sale

    ReplyDelete
  12. We are really grateful for your blog post. You will find a lot of approaches after visiting your post. I was exactly searching for. Thanks for such post and please keep it up. Great work. CO2 laser cutter

    ReplyDelete

Post a Comment

Thanks for commenting!

Popular posts from this blog

Our most popular makerspace/STEM/Library of Things

As of April 2018, we did a kit circulation report.  We had 106 kits which have circulated 1,047 times since it's inception in 2015.  Here is the top 10 list of most circulated. These include hobby kits, puzzles, cake pans, instruments, science robots/STEM, and American Girl dolls. The ukulele kits (we have one soprano and one concert kit) have been around the longest and have circulated 106 times total.  Just remember someone should change the strings yearly and definitely include a tuner (we like the snark) as new strings on a uke take a while to break in. Surprisingly our meditation toolbox comes in second with 51 checkouts.  It is just some CDs and a DVD.  This one has also been around since the inception of our kits. Next up is our virtual reality headset toolbox.  It is a Homido Virtual Reality headset. If that is too pricey, I recommend Google Cardboard.  Our sewing machine comes in 5th.  Knitting is a great idea for a toolbox and very popular but li

New ideas for Circulation-Library of Things/ Makerspace Kits

The DFL currently experiments with hobby, STEAM, and Technology kits that are housed both in the adult section and the kids room. These kits include musical instruments, video equipment, puzzles, cake plans, robots, looms, and more available for checkout.  The kits are bought using our Amazon prime account, under the supervision of the head of circulation using a special makerspace kit budget and backed up by a kit committee made up of various departments to streamline the process.  The kits with the most holds by far have been the Retro Nintendo  and Super Nintendo Classic which were small batch pre-Christmas releases for the last two years.  Rather than blowing the dirt out of your old cartridges, these consoles have games built in for your playing pleasure. According to Walmart, the Nintendo "classics" are on sale as of today.  Our kit contains a small palm sized console, 2 controllers (try to upgrade wireless ones if you can), an ac adapter, and, I recommend, a carr

3D Printing Signs for the Library Collection

Last weekend, I went to the annual Tee-Off mini golf event at the Brookline Public Library.  As a first time visitor, I was mini-golfing with my phone at the ready. Special thanks to the AMAZING librarian rockstar Robin Brenner for so many great ideas. It truly is worth a visit just to see her teen room. Here are a few 3D printing/marketing ideas to takeaway: Having a  3D printer filtration cart would be wonderful in our library.  Look at the price if you dare.  Right now I have to go downstairs to retrieve prints because we are concerned about the fumes and little hands touching anything while the printer is on.  I have a video camera set up downstairs using an iPad 2 and the free app called Presence  for monitoring but sometimes I do forget to keep checking the presence website while I'm on the desk especially since it makes this annoying beeping sound to say, "Are you still watching?!"..As the sign reveals on the cart, the propensity to want to lean or jostle the car